Best Sellers

Pemasaran

Kegunaan Pejabat

Hospitaliti

Majlis & Acara

Lihat Semua

Print Your Label Online

Please follow our artwork preparation guidelines to ensure that your artwork file is set up correctly.

  • 1. Add 3 mm of bleed

    During the production of paper products, cutting imperfections are to be expected - cutting can be off by a couple of millimetres from the cutting line. To allow leeway for such imperfections, you should add 3 mm of bleed on all edges of your artwork. Make sure all colours, background pictures, and elements extend to the edge of the bleed area, to avoid the appearance of white borders on certain edges after cutting.

  • 2. Keep your content within a 3 mm safety margin

    To ensure that no important elements (text, graphics, images) get cut off from your paper product, make sure to keep such elements at least 3 mm away from the edge of your finished product dimensions.

  • 3. Use CMYK colour mode

    Except for silkscreen and pad printing, files should be prepared in CMYK colour mode. Keep in mind that if the setup is wrong, colours on the finished product may differ from the file you sent. Here is how to set your artwork to CMYK colour mode in Adobe Illustrator.

  • 4. Use an image resolution of at least 300 DPI

    To avoid blurriness, use only images and graphics that have a resolution of 300 DPI or more. Before sending your files, make sure to embed your images into the file. Read more about how to check the resolution of your assets.

  • 5. Use the right values for grey elements

    When setting up grey elements, set K to a percentage between 0 and 100, and keep all other colors (C, M, and Y) equal to 0%.

  • 6. Use the right values for black elements

    When setting up black text, thin lines and small elements, use pure black (i.e. C = 0, M = 0, Y = 0, K = 100). Text, thin lines, and small elements in pure black colour should be set to overprint to avoid white gaps around the text.

    For larger elements, use a composite form of black (we recommend C = 30, M = 0, Y = 0, K = 100).

  • 7. Use maximum 2 colours for lines that are finer than 2 pt

    If lines are 2 pt thick or less, use only 1 or 2 colours. 4 colours may be used for thicker lines.

  • 8. Convert all fonts to outlines, or embed them in your file

    To avoid issues with fonts when submitting your file(s), make sure to convert fonts to outlines, or to embed all fonts when saving to PDF.

  • 9. Save and upload your artwork files as PDF/X-1a

    The best format for submitting print-ready files is PDF, under the PDF/X-1a standard. Where possible, submit your files in PDF format.

  • 10. Check for overprint

    Make sure that no elements are set on overprint, unless you need them to be.

  • 11. Include a die-cut layer

    For products that include die-cutting, include a die cut layer in the artwork file.

Our free templates provide you with all the information you need to correctly prepare your artwork files for printing. Simply download the template that matches your desired product configuration.

If you have any questions about the product and ordering process, please have a look at our Frequently Asked Questions (FAQ). If can't find your question in our FAQ section, you can reach our friendly customer support on +6015 4840 8963.

  • 1. How long will my n last?

    It is difficult to generalize how long your n will last as it depends on the material and its usage. Generally speaking, our PVC n will last a bit longer than our paper n as they are laminated.

  • 2. What is the fastest delivery for n?

    The fastest delivery time for n is d. If your order is shipped to an address in Kuala Lumpur, the shortest delivery time is 1 business day. Please note that you have to submit your order before 12:00 PM. Late payment or upload of your artwork might further delay your order. If you select Online Proof or Digital Proof Print during the checkout process, the production will only begin after your approval.

  • 3. How will my n be delivered?

    Our n are delivered on A4 sheets. We currently do not offer our stickers cut individually.
  • 4. I can't find what I'm looking for. Can I request a quote?

    If you can't find what you need, please call our customer service team at +6015 4840 8963 to help you place an order. You can also request a quote from our customer service team for special product configurations that are not available on our website.

  • 5. Which materials can I choose?

    We offer four different types of material for n: 1) Simili stickers, a paper material that is tearable and only suitable for indoor use. 2) Mirrorcoat stickers, also a paper material but with a mirror-like gloss on the surface. Not entirely waterproof and only suitable for indoor use. 3) Synthetic matte white stickers, a plastic-like material that is non-tearable and waterproof. Suitable for indoor and outdoor use. 4) Synthetic transparent stickers, also a plastic-like material, but with the added benefit of being transparent.

  • 6. Which refinements can I choose?

    We do not offer additional refinements on our n. If you wish to you use your n outdoor, please select our synthetic matte white or synthetic transparent n.

  • 7. How can I upload my files?

    Your file can be uploaded either before you checkout and pay, or after. Please note that uploading files late might result in a moved expected delivery date.
  • 8. Which formats can I upload?

    The best format for submitting print-ready files is PDF, under the PDF/X-1a standard. However you can also upload your file in JPEG, PNG, PSD, EPS, TIFF or AI format for an additional fee of RM 25.00. Our graphic designers will then convert your file into a print-ready PDF file.

Free Delivery In
West Malaysia

Satisfaction
Guaranteed

High Quality
At Low Prices

1. Buat Pilihan Anda

    • * Kelebaran mesti di antara cm dan cm
    • * Ketinggian mesti di antara cm dan cm
    • * Kuantiti produk mesti lebih dari 50 keping dan Kurang dari 10000 keping
    • * Kuantiti produk anda sudah ada
    • * Your number of pages is not available.

Format

Cetak dalam Warna Penuh

Warna Penuh Bahagian Depan Sahaja

Cetak CMYK pada satu bahagian

Cetak dalam Warna Hitam and Putih

Black Color on Front Only

Print Black on one side

Jenis Material

Kemasan

Bentuk Sticker

Penghantaran Sticker

Informasi Penting Pelanggan Untuk Pemesanan Label

  • Untuk menyedia dan menghantar fail kerja seni anda, sila ikut garis panduan spesifik kami untuk pelekat, dimana anda boleh mencarinya disini .
Label
Anda Telah Pilih:

Muat Naik Reka Bentuk

  • ProdukLabel
  • Format3 x 3 cm
  • Muka suratDepan Sahaja
  • WarnaWarna Penuh Bahagian Depan Sahaja
  • Jenis MaterialSynthetic Transparent Sticker
  • KemasanTiada
  • Bentuk StickerSquare
  • Kuantitikeping
  • Tarikh Penghantaran
Placing an order is fast and easy. Click below and follow the steps.
How to Order

3. Pilihan Anda yang Muktamad

Pilihan Tambahan

File Format

File Check

If a proof print is requested, product will be delivered ca. after approval of printed proof. If you require the products urgently, please check with our customer service before placing an order.

Ringkasan Tempahan Anda

  • Format3 x 3 cm
  • Muka suratDepan Sahaja
  • WarnaWarna Penuh Bahagian Depan Sahaja
  • Jenis MaterialSynthetic Transparent Sticker
  • KemasanTiada
  • Bentuk StickerSquare
  • Kuantiti keping
  • Jangkaan Masa Penghantaran
  • File format Free
  • File check Free
  • Subjumlah RM0.00
  • 0% RM0.00
  • Jumlah RM0.00

Terma dan Syarat

Pembayaran

  • Pembayaran harus dibuat sebelum Isnin, 12:00 PM. For bank transfer payment, transfer slip has to be sent.
  • Pembayaran lambat akan menyebabkan masa penghantaran tertangguh

Artwork

  • Artwork files have to be uploaded before Isnin, 12:00 PM. Lambat muat naik akan menyebabkan penghantaran menjadi lewat
  • Hanya satu fail artwork dimuat naik untuk satu item tempahan
Upload Now

Click here if you want to upload your files now, and then checkout

Upload Later

Artwork not ready? Click here to checkout first, and upload your files later

Can’t find what you need?

Speak to one of our friendly executives by calling

+6015 4840 8963

4 Cara Mudah Untuk Cetak Secara Online Dengan Gogoprint

Step 1 - Choose and Configure Products

Pilih produk yang anda mahu dan pilih format, jenis kertas, warna etc.

Kemudian, pilih kuantiti dan tempoh produk untuk dihantar

Kualiti yang tinggi pada harga rendah!! Semak harga di laman web kami 24 jam

Kami akan membantuanda sepanjang pemilihan produk

Step 2 - Payment

Pindahan BankPindahkan wang ke akaun

Kad Kredit Boleh bayar menggunakan kad kredit atau kad debit (tiada ekstra caj)

Tunai sewaktu Penghantaran Buat pembayaran produk sewaktu penghantaran

Terma Kredit Jika anda mempunyai jumlah cetakan yang tinggi, tekan sini untuk mendapatkan terma kredit.

Step 3 - File Upload

Muat Naik Fail Artwork
Adakah anda sudah mempunyai fail 'artwork'? Bagus! Muat naik ia selepas anda selesai daftar keluar.

Servis Reka Bentuk
Tiada fail 'artwork' lagi? Please contact us Sila hubungi kami dengan reka bentuk yang anda mahu untuk dapatkan sebut harga.

Step 4 - Delivery

Penghantaran adalah percuma untuk Semenanjung Malaysia! Kami menghantar melalui CityLink dan penghantar motorsikal

Pengeluaran 24 jam disediakan
(1 hari pengeluaran+1 hari untuk penghantaran)

Kod traking disediakan

Kenapa Cetak Dengan Kami?

Kelebihan

 

Cetakan Tradisional

Step Two: Configure Products

Kualiti Tinggi pada Harga yang Rendah

   
Step Two: Configure Products

Sebut Harga Segera

   
Step Two: Configure Products

Penghantaran Percuma dan Pantas

   
Step Two: Configure Products

Proses Tempahan yang Mudah

   
Step Two: Configure Products

24 Jam

   
Step Two: Configure Products

Terma kredit